Marine Tube Condensing Unit
Shell and Tube Evaporator and Condenser
1, the heat transfer area is wide: the cooler of the heat pipe with
copper pipe design, the contact area is
wide, so the heat transfer effect than the average smooth heat
transfer tube to high.
2, good heat transfer: This series of copper tube is directly
rotary copper processing, so that the
integration of heat transfer tube, so good heat transfer and
indeed, there is no loss of solder joints
caused by poor heat transfer.
3, can be suitable for large flow: reduced number of heat transfer
tubes, the use of smooth fluid area
increases, and can prevent the pressure loss. Inside with a baffle
guide flow, can produce bending flow,
growth process, play a role.
4, a good heat transfer tube: good thermal conductivity of 99.9%
copper, the most suitable for the cooling
of the cooling tube.
5, no oil: the board and the body with the integration of the
design, you can avoid water and oil mixed with
the troubles at the same time in the factory before the airtight
test is indeed close, it can achieve the
purpose of leakage.
6, easy assembly: foot can be free to turn 360 degrees, for the
body to replace the direction and angle of
the assembly, through the foot can be directly welded in the
machine or tank any location, both
convenient and simple.
7, spiral guide plate to guide the oil into a spiral continuous
uniform flow, to overcome the traditional
folding heat generated dead ends, high heat transfer efficiency,
8, the flow of two processes and four processes, the flow of large
flow (baffle large lead) small flow (baffle
small lead), variety, to meet the various requirements.